Home » Quality Control

Quality Control

PS AGRITECH PVT LTD is committed to achieve excellence in all spheres and therefore, pursues continuous quality improvement in totality. We have been certified with ISO 9001 by TUV for our quality management system at par with global standards. Besides, we have a well audited quality system to ensure the best of international standards on continuing basis. We consistently upgrade quality management system as per the latest specifications.

Stringent quality control measures are followed at every stage right from raw material procurement to consignment dispatch. We have in-house quality testing section with highly advanced equipment for the same. The testing is carried out by experienced professionals on prescribed parameters before delivery. The detail of quality testing is given as follows :

In addition to our manual which confirms ISO 9001. We are also following ISO 14000 and the audit is due in the month of December. Understanding the need of current environment, We are additionally following the formats like PPAP, AP&P, SPC, MSA, FMEA and trying to get our TS Certification as soon as possible.

FEATURES	EQUIPMENTS USED TO MEASURE	CONTROL PROCEDURE
Raw material composition and physical microscope spectro.	Metallographic testing for cracks, metallurgical chemical testing machine, hardness tester.	Sampling inspection.
Concentricity or runout less than 0.03mm.	Dial gauges with bench centre.	Sampling inspection.
Roundness less than.	Micrometer with least count of 1 micron, diagauge, bench centre.	Sampling inspection.
Roundness less than.	Micrometer with least count of 1 micron, bench centre.	Sampling inspection.
Surface Finish less than 0.9Ra.	Surface finish inspection chart, surface finish tester.	Sampling inspection.
Diameters tolerance less than 0.06mm.	Micro meter wid suitable least count, snap gauges well calibrated.	100 % Inspection.
All squareness tolerances.	Height gauge with dial gauge.	Sampling inspection.
All straightness tolerances.	Height gauge with dial gauge, Bench Centre.	Sampling inspection.
Inside diameters with tolerance less then 50 microns.	Bore gauges and well calibrated plug gauges.	Sampling inspection during in process, 100 inspection during packing.
Inside and out side grooves.	Jaw/groove calipers.	Sampling inspection.
Inside & Outside Grooves & radius.	Profile Projector, Jaw & Groove Caliper.	Sampling Inspection.

Q.C. for Heat treatment

FEATURES	EQUIPMENTS USED TO	CONTROL PROCEDURE
Depth Total & effective & cracks	Micro hardness testing machine, metallurgical microscope, metallographic testing for cracks	Sampling inspection.

Q.C. for Electroplating

FEATURES	EQUIPMENTS USED TO	CONTROL PROCEDURE
Total depth, effectiveness	Plating depth tester pen type, salt spray test	Sampling inspectionSampling inspection , 100% visual test (colour, shining)